| LTE SPECIFICATIONS |
|---|
| Operating Band | Cat M1 / Cat NB2
Cat M1: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B27/B28/B66/B85
Cat NB2: (*Cat NB1 is available in Brazil)
B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B28/B66/B71/B85 |
| Data Transmission | eMTC (DL) 348 Kbps
eMTC (UL) 1.08 Mbps
NB2 (DL) 121 Kbps
NB2 (UL) 150 Kbps
NB1 (DL) 74.1 Kbps
NB1 (UL) 101 Kbps |
| EGPRS SPECIFICATIONS |
|---|
| Frequency | EGPRS 850 / 900 / 1800 / 1900 MHz |
| Data Transmission | GPRS: 107 Kbps (DL) / 85.6 Kbps (UL)
EDGE: 296 Kbps (DL) / 236.8 Kbps (UL) |
| GNSS SPECIFICATIONS |
|---|
| GNSS Type | u-blox All-in-One GNSS receiver |
| Sensitivity | Autonomous: -147 dBm
Hot start: -156 dBm
Reacquisition: -160 dBm
Tracking: -162 dBm |
| Position Accuracy (CEP) | Autonomous: < 2.5 m |
| TTFF (Open Sky) | Cold start: 27 s average
Warm start: 27 s average
Hot start: 1 s average |
| GENERAL SPECIFICATIONS |
|---|
| Dimensions | 87 × 51 × 30 mm
3.43" (L) × 2.01" (W) × 1.18" (H)
87 × 51 × 33.5 mm
3.43" (L) × 2.01" (W) × 1.32" (H) (magnetic case mounting version) |
| Weight | 140 g (4.94 oz)
160 g (5.64 oz) (magnetic case mounting version) |
| Backup Battery | 3 × CR123A lithium batteries, 1400 mAh |
| Standby Time | 1 report per day (GNSS on): 5 years
1 report per day (Cell ID only): 7 years
*Standby time estimated under LTE Cat M1/NB-IoT operation with CSQ > 15, constant ambient temperature of 25°C, reporting once per day with no sensors connected. |
| Waterproof | IP67 compliant |
| Operating Temperature | -20℃ ~ +60℃ |
| Internal Temperature Sensor | For temperature monitoring
Accuracy: ±1℃ |
| Internal Light Sensor | For tamper detection and ambient light monitoring |
| Internal Motor | Provides vibration feedback after successful operation of function button |
| Magnetic Mounting Case (Optional) | For easy installation on metal surfaces |
| INTERFACES |
|---|
| Function Button | Used for power on/off and working status checking |
| LTE Antenna | Internal only |
| GNSS Antenna | Internal only |
| LED Indicators | GNSS, Status |
| AIR INTERFACE PROTOCOL |
|---|
| Command Set | @Track protocol command |
| Transmit Protocol | TCP, UDP, SMS |
| Working Modes | Power saving mode for long standby time
Continuous mode for emergency tracking |
| Scheduled Timing Report | Report position and status at preset time intervals |
| Geo-fences | Support up to 20 internal geo-fence regions |
| Low Power Alarm | Alarm when internal battery is low |
| Wakeup Report | Report when the device wakes up |
| Motion Detection | Motion detection based on internal 3-axis accelerometer |
| Reporting Frequency Adjustment | Intelligent adjustment of reporting frequency |
