SKU: 14082

Select Title

Default Title

Add to cart

Ask a question

Availability & delivery

✔ Available to order

Supplied to order from the manufacturer. Please contact us to confirm delivery lead time before placing your order.

🚚 Free UK delivery on orders over £250

Need help choosing?

If you’re unsure which product is right for your project, our in-house team is here to help.

• Message us via the chat bubble (Mon–Fri, 9–5)
• Or give us a call on +44 (0) 1234 247176

Downloads

  GL30MG Datasheet

Specification

LTE SPECIFICATIONS
Operating Band	Cat M1: LTE FDD B2/B4/B12/B13/B66 Cat NB2: LTE FDD B2/B4/B12/B13/B66
EGPRS SPECIFICATIONS
Frequency	EGPRS: 850 / 1900 MHz
GNSS SPECIFICATIONS
GNSS Type	All-in-One receiver
Constellation Support	GPS, GLONASS, Galileo, BeiDou
Position Accuracy (CEP50)	Autonomous: < 2.0 m
GENERAL SPECIFICATIONS
Dimensions	60 × 31.7 × 19.66 mm 2.36 × 1.25 × 0.77 inch
Weight	37.6 g (1.33 oz)
Internal Battery	Li-Polymer 650 mAh (Rechargeable Battery)
Standby Time	Continuous Mode: 5 Min Reporting: 5 days 10 Min Reporting: 8 days Power Saving Mode: 1 Report per Hour: 16 days 1 Report per Day: 190 days *eMTC, UDP, WiFi & BLE off, GPS open sky, LTE Cat M1/NB2 CSQ > 15, operating temperature 10 °C ~ 25 °C
Waterproof	IP67
Operating Temperature	-20 °C ~ +60 °C
Storage Temperature	-20 °C ~ +60 °C
Region	EMEA
Certification	CE (Planned)
INTERFACES
LTE Antenna	Internal only
GNSS Antenna	Internal only
BLE Antenna	Internal only
WiFi Antenna	Internal only
LED Indicators	One RGB LED (CELL, Power, GNSS)
Function Button	One Activation / Alarm Key
I/O Interface	5-pin magnetic suction interface 2-pin for charging 3-pin for I/O (can be used for download and debug)
Buzzer	Metal patch buzzer
SIM	eSIM chip (MFF2 eSIM)
AIR INTERFACE PROTOCOL
Transmit Protocol	TCP, UDP, SMS
Scheduled Timing Report	Report messages at preset time intervals
Geo-Fences	Support up to 20 internal geo-fence regions Automatically reports when entering / exiting geo-fence
Low Power Alarm	Alarm when internal battery is low
OTA Control	Remote configuration of parameters including position interval, measurement interval, sensor activation/deactivation, and firmware upgrades
Command Set	@Track protocol command
SOS Alarm	SOS alarm via pressing function button
Motion Detection	Motion alarm based on internal 3-axis accelerometer
Power On/Off Report	Report when the device is powered on and off
Working Modes	Power saving mode for long standby time Continuous mode for emergency tracking

Share