SKU: CT-IPEH-002038
Downloads
Specification
Share
PCAN-Optoadapter
Regular price£129.80 Sale price Pricing excludes VAT.Shipping cost calculated in checkout.
Select Title
Notice:
Some of our products are on varied lead times, For confirmation on when you can expect your order to arrive, please call in and speak to one of our experts.
Our team are available from 9:00am - 5:00pm on +44(0) 1234 247 176 and will be happy to discuss any questions.
- Plug-on adapter for decoupling a CAN bus for PEAK CAN interfaces
- Galvanic isolation by DC/DC converters up to 500 V
- Bit rates from 5 kbit/s up to 1 Mbit/s
- High-speed CAN transceiver NXP PCA82C251
- Suitable for the use in CAN FD buses with data bit rates up to 2 Mbit/s and nominal bit rates up to 1 Mbit/s
- CAN bus connection via D-Sub, 9-pin (in accordance with CiA® 303-1)
- LED for status indication of the supply voltage
- 120-Ohm bus termination at the female D-Sub connector
- 5-Volt power supply through pin 1 of the High-speed CAN connection. Nearly all CAN interfaces by PEAK-System can provide the required supply
- Extended operating temperature range from
-40 to 85 °C (-40 to 185 °F)
Pin | Pin assignment |
---|---|
1 | 5V Power supply |
2 | CAN-L |
3 | GND |
4 | Not connected |
5 | Not connected |
6 | GND |
7 | CAN-H |
8 | Not connected |
9 | Not connected |
Pin | Pin assignment |
---|---|
1 | Not connected |
2 | CAN-L |
3 | GND |
4 | Not connected |
5 | Not connected |
6 | GND |
7 | CAN-H |
8 | Not connected |
9 | Not connected |
The PCAN-Optoadapter is a universal plug-on adapter to allow galvanic isolation of High-speed CAN bus systems.
Its integrated logic means that decoupling can be installed at any point in the CAN network.
The PCAN-Optoadapter can be used in CAN FD busses with data bit rates up to 2 Mbit/s and nominal bit rates up to 1 Mbit/s.
- Plug-on adapter for decoupling a CAN bus for PEAK CAN interfaces
- Galvanic isolation by DC/DC converters up to 500 V
- Bit rates from 5 kbit/s up to 1 Mbit/s
- High-speed CAN transceiver NXP PCA82C251
- Suitable for the use in CAN FD buses with data bit rates up to 2 Mbit/s and nominal bit rates up to 1 Mbit/s
- CAN bus connection via D-Sub, 9-pin (in accordance with CiA® 303-1)
- LED for status indication of the supply voltage
- 120-Ohm bus termination at the female D-Sub connector
- 5-Volt power supply through pin 1 of the High-speed CAN connection. Nearly all CAN interfaces by PEAK-System can provide the required supply
- Extended operating temperature range from
-40 to 85 °C (-40 to 185 °F)
Pin | Pin assignment |
---|---|
1 | 5V Power supply |
2 | CAN-L |
3 | GND |
4 | Not connected |
5 | Not connected |
6 | GND |
7 | CAN-H |
8 | Not connected |
9 | Not connected |
Pin | Pin assignment |
---|---|
1 | Not connected |
2 | CAN-L |
3 | GND |
4 | Not connected |
5 | Not connected |
6 | GND |
7 | CAN-H |
8 | Not connected |
9 | Not connected |