PLIN-USB Specifications

Download User Manual

Specifications

  • Adapter for the USB connection (Full-Speed mode, compatible with USB 1.1, USB 2.0, and USB 3.0)
  • LIN connection (ISO 17987)
  • Compliant with all LIN specifications
    (up to version 2.2)
  • Bit rates from 1 kbit/s up to 20 kbit/s
  • Can be used as a LIN master or slave (1 ms master task resolution)
  • Automatic bit rate, frame length, and checksum type recognition
  • Autonomous scheduler with support for unconditional, event, and sporadic frames
  • LIN bus connection via D-Sub, 9-pin
  • LIN connection short-circuit-proof against transceiver supply and ground
  • NXP TJA1028T LIN transceiver
  • Galvanic isolation on the LIN connection up to 500 V
  • Indicator LED for interface status
  • Adapter supply 5 V DC via USB port
  • Transceiver supply 6 - 28 V DC via D-Sub, pin 9
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

Pin assignment D-Sub

Pin Pin assignment
1 not connected
2 not connected
3 not connected
4 LIN
5 GND
6 GND
7 not connected
8 not connected
9 VBAT