PCAN-USB X6 Specifications

Download User Manual

Specifications

  • Adapter for High-speed USB 2.0 (compatible to USB 1.1 and USB 3.0)
  • 6 High-speed CAN channels (ISO 11898-2)
  • Galvanic isolation on the CAN connection up to
    300 V (only for IPEH-004063 and IPEH-004064)
  • Complies with CAN specifications 2.0 A/B and FD
  • CAN FD support for ISO and Non-ISO standards switchable
  • CAN FD bit rates for the data field (64 bytes max.) from 25 kbit/s up to 12 Mbit/s
  • CAN bit rates from 25 kbit/s up to 1 Mbit/s
  • Time stamp resolution 1 µs
  • FPGA implementation of the CAN FD controller
  • NXP TJA1044GT CAN transceiver
  • Status LEDs for CAN channels, USB upstream, and power supply
  • CAN connection via D-Sub, 9-pin or M12 circular connectors, 5-pin (pin assignment of both connectors in accordance with CiA® 303-1)
  • Aluminum casing with increased Ingress Protection IP64 (only for IPEH-004063)
  • High-speed USB 2.0 downstream port (only for IPEH-004062 and IPEH-004064)
  • CAN termination can be activated through a solder jumper, separately for each CAN channel
  • Measurement of bus load including error frames and overload frames on the physical bus
  • Induced error generation for incoming and outgoing CAN messages
  • Voltage supply from 8 to 30 V
  • Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

Pin assignment D-Sub

Pin Pin assignment
1 not connected
2 CAN-L
3 GND
4 not connected
5 not connected
6 GND
7 CAN-H
8 not connected
9 not connected

Pin assignment M12

Pin Pin assignment
1 Shield
2 not connected
3 GND
4 CAN-H
5 CAN-L