PCAN-Router Pro FD Specifications
Specifications
- 6 High-speed CAN channels (ISO 11898-2)
- Comply with CAN specifications 2.0 A/B and FD
- CAN FD support for ISO and Non-ISO standards
- CAN FD bit rates for the data field (64 bytes max.) from 40 kbit/s up to 12 Mbit/s
- CAN bit rates from 40 kbit/s up to 1 Mbit/s
- NXP TJA1043 CAN transceiver with wake-up
- Alternative pluggable transceiver modules on request
- CAN connections are D-Sub, 9-pin
- CAN termination switchable, separately for each CAN channel
- Wake-up function using separate input, CAN bus, or real-time clock
- 2 digital I/Os, each usable as digital input or output with High-side switch
- 2 digital I/Os, each usable as digital input or output with Low-side switch
- 1 analog input (0 - 33 V)
- Recording of CAN data and error frames
- Internal memory: 16 GByte pSLC eMMC
- SD card slot for additional memory
- USB connection for accessing the data memory (e.g. recorded log data)
- Conversion of logging data to various output formats using the Windows software PEAK-Converter
- Battery-buffered real-time clock (RTC), can also be used for wake-up
- Beeper
- Status LEDs for CAN channels, memory cards, and power supply
- Microcontroller STM32F765NIH6 (based on Arm® Cortex® M7)
- 32 MByte SDRAM in addition to microcontroller RAM
- Aluminum casing with flange
- 8 - 32 V power supply, protection against overvoltage and reverse polarity
- Slot for a backup battery for defined switch-off behavior (e.g. for log data saving)
- Optional on request: Ethernet interface via RJ-45 socket or BroadR-Reach® interface via D-Sub connector
- Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)