PCAN-PC/104 Specifications
Specifications
- Form factor PC/104
- Multiple PC/104 cards can be operated in parallel (interrupt sharing)
- 14 port and 8 interrupt addresses are available for configuration using jumpers
- 1 or 2 High-speed CAN channels (ISO 11898-2)
- Bit rates from 5 kbit/s up to 1 Mbit/s
- Compliant with CAN specifications
2.0A (11-bit ID) and 2.0B (29-bit ID) - Connection to CAN bus through D-Sub slot bracket, 9-pin (in accordance with CiA® 303-1)
- NXP SJA1000 CAN controller, 16 MHz clock frequency
- NXP PCA82C251 CAN transceiver
- 5-Volt supply to the CAN connection can be connected through a solder jumper,
e.g. for external bus converter - Galvanic isolation on the CAN connection up to 500 V, separate for each CAN channel
(only for IPEH-002056 and IPEH-002057) - Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
Pin assignment D-Sub
| Pin | Pin assignment |
|---|---|
| 1 | Not connected / optional +5V |
| 2 | CAN-L |
| 3 | GND |
| 4 | Not connected |
| 5 | Not connected |
| 6 | GND |
| 7 | CAN-H |
| 8 | Not connected |
| 9 | Not connected / optional +5V |
All development software packages may be downloaded directly from PEAK-system: PCAN-PC/104 Development Package