PCAN-PC/104-Plus Specifications
Specifications
- Form factor PC/104
- Use of the 120-pin connection for the PCI bus
- Up to four cards can be used in one system
- 1 or 2 High-speed CAN channels (ISO 11898-2)
- Bit rates from 5 kbit/s up to 1 Mbit/s
- Compliant with CAN specifications
2.0A (11-bit ID) and 2.0B (29-bit ID) - Connection to CAN bus through D-Sub slot bracket, 9-pin (in accordance with CiA® 303-1)
- NXP SJA1000 CAN controller, 16 MHz clock frequency
- NXP PCA82C251 CAN transceiver
- 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
- Galvanic isolation on the CAN connection up to 500 V, separate for each CAN channel
(only for IPEH-002096 and IPEH-002097) - Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
- Optionally available: PC/104-ISA stack-through connector
Pin assignment D-Sub
Pin | Pin assignment |
---|---|
1 | Not connected / optional +5V |
2 | CAN-L |
3 | GND |
4 | Not connected |
5 | Not connected |
6 | GND |
7 | CAN-H |
8 | Not connected |
9 | Not connected / optional +5V |
All development software packages may be downloaded directly from PEAK-system: PCAN-PC/104-Plus Development Package