{"title":"Repeaters \u0026 Transceivers","description":"\u003cp data-start=\"2788\" data-end=\"2917\"\u003eRepeaters and transceivers are used to extend, isolate, and stabilise communication signals within CAN and industrial networks.\u003c\/p\u003e\n\u003cp data-start=\"2924\" data-end=\"3110\"\u003eThis collection includes devices designed to improve signal integrity, increase network length, provide galvanic isolation, and support reliable communication across distributed systems.\u003c\/p\u003e","products":[{"product_id":"pcan-repeater-dr","title":"PCAN Repeater DR","description":"\u003cp\u003ePCAN Repeater DR: CAN and CAN FD Repeater for the Decoupling of Bus Segments\u003c\/p\u003e\n\u003cp\u003eThe PCAN-Repeater DR establishes a connection between two High-speed CAN busses with galvanic isolation of up to 5 kV. Both CAN channels are decoupled from each other and from the power supply. All message traffic including error frames is forwarded 1:1 between both channels, if necessary, in one direction only. The PCAN-Repeater DR behaves passively and is transparent from the perspective of the CAN bus. LEDs display the current bus status. With its DIN rail casing and extended temperature range support, this module is suitable for use in an industrial environment.\u003c\/p\u003e\n\u003cp\u003eThe PCAN-Repeater DR can be used in CAN FD busses with data bit rates up to 4 Mbit\/s and nominal bit rates up to 1 Mbit\/s.\u003c\/p\u003e\n\u003cp\u003ePlease note: Due to the CAN protocol, the maximum length of a CAN bus depends on the bit rate. Therefore, a bus cannot be extended with the PCAN-Repeater DR. The physical total length of the CAN bus is reduced with each built-in PCAN-Repeater DR according to its signal delay.\u003c\/p\u003e","brand":"PEAK-System Technik","offers":[{"title":"Default Title","offer_id":39967144837166,"sku":"CT-IPEH-004038","price":261.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/products\/PCANRepeaterDR.png?v=1665745001"},{"product_id":"ixxat-can-fd-repeater-standard","title":"Ixxat CAN\/FD Repeater Standard","description":"\u003ch3 data-end=\"477\" data-start=\"129\"\u003e\u003cstrong data-end=\"149\" data-start=\"129\"\u003eProduct Overview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-end=\"477\" data-start=\"129\"\u003e\u003cspan\u003eThe Ixxat CAN\/FD Repeater Standard with two CAN\/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems, and offers galvanic isolation. It provides the flexibility to optimise network structures and liberates them from CAN bus structure constraints for optimised operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-end=\"737\" data-start=\"479\"\u003e\u003cstrong\u003eFeatures and Benefits\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"149\" data-end=\"283\"\u003e• Robust industrial use\u003cbr data-start=\"172\" data-end=\"175\"\u003eDesigned for industrial environments, meeting high demands for robustness, temperature ranges, and safety.\u003c\/p\u003e\n\u003cp data-start=\"285\" data-end=\"444\"\u003e• Flexibility in CAN FD network design\u003cbr data-start=\"323\" data-end=\"326\"\u003eHelps to optimise CAN\/CAN FD network structures by enabling extended layouts (stub lines, star and tree topologies).\u003c\/p\u003e\n\u003cp data-start=\"446\" data-end=\"608\"\u003e• Removable push-in connectors\u003cbr data-start=\"476\" data-end=\"479\"\u003eFeatures removable push-in connectors, ensuring hassle-free installation and maintenance without the need for additional tools.\u003c\/p\u003e\n\u003cp data-start=\"610\" data-end=\"822\"\u003e• Fast and transparent operation\u003cbr data-start=\"642\" data-end=\"645\"\u003eMinimal impact on real-time behavior, equivalent to a short line length (ca. 35 m\/175 ns delay). Enabling transparent transmission, compatible with all higher layer protocols.\u003c\/p\u003e\n\u003cp data-start=\"824\" data-end=\"982\"\u003e• Cost savings due to simple wiring\u003cbr data-start=\"859\" data-end=\"862\"\u003eOptimized topologies enable simpler wiring, resulting in less cables and cost savings at installation and maintenance.\u003c\/p\u003e\n\u003cp data-start=\"984\" data-end=\"1226\"\u003e• Enhanced network reliability\u003cbr data-start=\"1014\" data-end=\"1017\"\u003eHigher system reliability by electrically isolating CAN\/CAN FD segments and power up to 5 kV DC for 1 minute. This enhances the protection of the device against damage to electronics caused by voltage peaks.\u003c\/p\u003e\n\u003cp data-start=\"1228\" data-end=\"1401\"\u003e• Network monitoring and fault recovery\u003cbr data-start=\"1267\" data-end=\"1270\"\u003eIn case of disturbances, the repeater automatically disconnects the affected segment and restores it after the fault is resolved.\u003c\/p\u003e\n\u003cp data-start=\"1403\" data-end=\"1625\"\u003e• Integrated bus termination resistors\u003cbr data-start=\"1441\" data-end=\"1444\"\u003eIntegrated bus termination resistors for each CAN channel (120 Ohm, separately switchable by piano switches) prevent reflections on the line ends and ensure optimum communication.\u003c\/p\u003e","brand":"Ixxat","offers":[{"title":"Default Title","offer_id":56787455181178,"sku":"80036","price":260.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/files\/1_01_0211_20000_CAN-FD_Repeater_Standard.png?v=1776074998"},{"product_id":"pcan-repeater","title":"PCAN-Repeater","description":"\u003cp\u003eThe PCAN-Repeater features two CAN ports with 5 kV galvanic isolation between each other and the power supply. It supports both, CAN CC and CAN FD buses, using bit rates from 14 kbit\/s up to 8 Mbit\/s. With its DIN rail housing and extended temperature range support, it is suitable for applications in industrial environments.\u003c\/p\u003e\n\u003cp\u003eThe PCAN-Repeater requires no configuration. All CAN messages and error frames are forwarded 1:1 between both ports, enhancing the quality of the CAN signals. From the perspective of the CAN bus, the repeater is transparent, just like a cable.\u003c\/p\u003e\n\u003cp\u003eThe PCAN-Repeater allows the galvanic isolation of two CAN bus segments and the realization of long stub lines, even with multiple CAN nodes.\u003cbr\u003e \u003c\/p\u003e\n\u003ch4\u003ePlease note\u003c\/h4\u003e\n\u003cp\u003eDue to the CAN protocol, the maximum length of a CAN bus depends on the bit rate. Therefore, a bus cannot be extended with the PCAN-Repeater. The physical total length of the CAN bus is reduced with each built-in PCAN-Repeater according to its transit delay.\u003c\/p\u003e\n\u003cdiv class=\"accordion active\"\u003e\n\u003ch3 class=\"active\"\u003eScope of Supply\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"panel\"\u003e\n\u003cdiv class=\"\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003ePCAN-Repeater in DIN rail plastic casing\u003c\/li\u003e\n\u003cli\u003e2 mating connectors 4-pin for CAN connections (Phoenix Contact: FKC 2,5\/ 4-ST GY - 1756260)\u003c\/li\u003e\n\u003cli\u003e1 mating connector 3-pin for power supply connection (Phoenix Contact: FKC 2,5\/ 3-ST GY - 1857772)\u003c\/li\u003e\n\u003cli\u003eManual in PDF format\u003c\/li\u003e\n\u003cli\u003ePrinted quick start guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"PEAK-System Technik","offers":[{"title":"Default Title","offer_id":56940441862522,"sku":"CT-IPEH-004039","price":260.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/files\/PCAN-Repeater-IPEH-004039_Website.jpg?v=1780408806"}],"url":"https:\/\/controltech.uk.com\/collections\/repeaters-transceivers\/brand-ixxat.oembed","provider":"Control Technologies","version":"1.0","type":"link"}