{"title":"CAN FD","description":"\u003cp data-start=\"2816\" data-end=\"2935\"\u003eCAN FD (Flexible Data Rate) extends classical CAN by allowing higher data throughput and larger payloads per message.\u003c\/p\u003e\n\u003cp data-start=\"2942\" data-end=\"3098\"\u003eProducts in this collection support modern CAN FD networks commonly used in automotive development, test environments, and next-generation embedded systems.\u003c\/p\u003e","products":[{"product_id":"pcan-minidiag-fd","title":"PCAN-MiniDiag FD","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe PCAN-MiniDiag FD is a compact, low-cost handheld device for basic diagnosis and checking of CAN and CAN FD buses. Service technicians and developers can easily access networks of vehicles, machines, or industrial equipment whose configuration is unknown. For this, the nominal bit rate for CAN and additionally the data bit rate for CAN FD are determined using bit timing measurement. Furthermore, the device has measuring functions for the termination, bus load, and voltage levels at the CAN connector.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cspan style=\"font-weight: 400;\" data-mce-fragment=\"1\" data-mce-style=\"font-weight: 400;\"\u003eExplore our \u003ca href=\"https:\/\/controltech.uk.com\/collections\/can-bus-testing-diagnostics-1\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCAN-bus Testing \u0026amp; Diagnostics products\u003c\/a\u003e\u003c\/span\u003e\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe PCAN-MiniDiag FD has an increased protection due to its membrane keypad and casing. The power is supplied by three replaceable batteries.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe new CAN FD standard (CAN with Flexible Data rate) is primarily characterized by higher bandwidth for data transfer. The maximum of 64 data bytes per CAN FD frame (instead of 8 so far) can be transmitted with bit rates up to 10 Mbit\/s. CAN FD is downward-compatible to the CAN 2.0 A\/B standard, thus CAN FD nodes can be used in existing CAN networks. However, in this case the CAN FD extensions are not applicable.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv id=\"gtx-trans\" style=\"position: absolute; left: 59px; top: 181.75px;\"\u003e\n\u003cdiv class=\"gtx-trans-icon\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"PEAK-System Technik","offers":[{"title":"Default Title","offer_id":39967119507502,"sku":"CT-IPEH-003070","price":370.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/products\/PCAN-MiniDiag-FD.jpg?v=1660902420"},{"product_id":"pcan-ethernet-gateway-fd-dr","title":"PCAN-Ethernet Gateway FD DR","description":"\u003cp\u003eThe PCAN-Ethernet Gateway FD DR allows access to classic CAN or modern CAN FD buses via an IP network. On top of that, CAN buses can be connected to each other via IP using multiple devices. CAN frames are wrapped in TCP or UDP message packets and then forwarded via the IP network from one device to another. The PCAN-Ethernet Gateway FD DR provides a LAN interface and two CAN FD interfaces that allow bit rates up to 10 Mbit\/s. For this, an AM5716 Sitara processor provides the needed performance.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe PCAN Gateway product family is configured via a convenient web interface. Alternatively, the JSON interface allows access via software. Both options provide status information and settings of the devices, the various communication interfaces, message forwarding, and filters.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eExplore our \u003ca href=\"https:\/\/controltech.uk.com\/collections\/gateways\" target=\"_blank\" rel=\"noopener\"\u003eCAN-bus Gateways\u003c\/a\u003e.\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe new CAN FD standard (CAN with Flexible Data rate) is primarily characterised by higher bandwidth for data transfer. The maximum of 64 data bytes per CAN FD frame (instead of 8 so far) can be transmitted with bit rates up to 10 Mbit\/s. CAN FD is downward-compatible to the CAN 2.0 A\/B standard, thus CAN FD nodes can be used in existing CAN networks. However, in this case the CAN FD extensions are not applicable.\u003c\/p\u003e","brand":"PEAK-System Technik","offers":[{"title":"Default Title","offer_id":39967125962798,"sku":"CT-IPEH-004012","price":828.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/products\/PCAN-EthernetGatewayFDDR.png?v=1665753053"},{"product_id":"pcan-micromod-fd-analog","title":"PCAN-MicroMod FD Analog","description":"\u003cp\u003eThe PCAN-MicroMod FD plug-in board can be purchased together with ready-to-use motherboards that provide peripherals for specific requirements. For the connection of CAN, I\/O, and power supply, spring terminal connectors are used. The motherboard PCAN-MicroMod FD Analog 1 puts the emphasis on analog inputs and outputs, which are provided with appropriate protective circuitry.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eExplore our \u003ca href=\"https:\/\/controltech.uk.com\/collections\/i-o-modules\" target=\"_blank\" rel=\"noopener\"\u003eI\/O modules\u003c\/a\u003e.\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003eThe PCAN-MicroMod FD is configured using the supplied Windows software. In addition to simple I\/O mapping to CAN IDs, function blocks are also available for processing the data. The configuration created on the computer is transferred via the CAN bus to the PCAN-MicroMod FD which then runs as an independent CAN node. Multiple modules can be configured independently on a CAN bus.\u003c\/p\u003e\n\u003cp\u003eAll PCAN-MicroMod FD products can alternatively be operated with CANopen firmware. Licenses for the CANopen firmware are available from our partner Embedded Systems Academy.\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eRequirements:\u003c\/h3\u003e\n\u003cp\u003eThe configuration requires a PEAK CAN interface.\u003c\/p\u003e","brand":"PEAK-System Technik","offers":[{"title":"Default Title","offer_id":39967137529902,"sku":"CT-IPEH-003087","price":539.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/products\/PCAN-MicroModFDAnalog.png?v=1665675753"},{"product_id":"pcan-usb-pro-fd","title":"PCAN-USB Pro FD","description":"\u003cp\u003ePCAN-USB Pro FD: CAN, CAN FD, and LIN Interface for High-Speed USB 2.0\u003c\/p\u003e\n\u003cp\u003eThe PCAN-USB Pro FD adapter enables the connection of CAN FD and LIN networks to a computer via USB. Two field buses can be connected at the same time, up to four with appropriate adapter cables (2 x CAN FD, 2 x LIN). Each CAN FD channel is separately isolated against USB and LIN with a maximum of 500 Volts. Its robust aluminum casing makes the PCAN-USB Pro FD adapter suitable for mobile applications.\u003c\/p\u003e\n\u003cp\u003eThe new CAN FD standard (CAN with Flexible Data rate) is primarily characterized by higher bandwidth for data transfer. The maximum of 64 data bytes per CAN FD frame (instead of 8 so far) can be transmitted with bit rates up to 12 Mbit\/s. CAN FD is downward-compatible to the CAN 2.0 A\/B standard, thus CAN FD nodes can be used in existing CAN networks. However, in this case the CAN FD extensions are not applicable.\u003c\/p\u003e\n\u003cp\u003eThe monitor software PCAN-View and the programming interface PCAN-Basic for the development of applications with CAN connection are included in the scope of supply and support the new standard CAN FD. The monitor application PLIN-View Pro as well as the PLIN programming interface are also included in the scope of supply.\u003c\/p\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003eISO \/ Non-ISO CAN FD: Since the first implementations of CAN FD, the protocol has been improved and is now included in the standard ISO 11898-1. The revised CAN FD standard is not compatible with the original protocol.\u003c\/p\u003e\n\u003cp\u003ePEAK-System takes this into account by supporting both protocol versions with their CAN FD interfaces. If required, the user can switch to the CAN FD protocol used in the environment by software („Non-ISO“ and „ISO“). Devices delivered until February 2015 need a firmware update for this functionality. If you are interested and for further information, please contact info@peak-system.com.\u003c\/p\u003e","brand":"PEAK-System Technik","offers":[{"title":"Default Title","offer_id":39967144804398,"sku":"CT-IPEH-004061","price":627.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/products\/PCAN-USBProFD.png?v=1773157078"},{"product_id":"pcan-usb-fd","title":"PCAN-USB FD","description":"\u003cp\u003eThe CAN FD interface PCAN-USB FD allows the connection of CAN CC and CAN FD networks to a computer, depending on the version via a USB-A or USB-C port. The simple handling and its compact plastic casing make the interface suitable for mobile applications. A galvanic isolation of up to 500 Volts decouples the PC from the CAN bus.\u003cbr\u003e\u003cbr\u003eThe CAN FD standard (CAN with Flexible Data rate) is primarily characterized by higher bandwidth for data transfer. The maximum of 64 data bytes per CAN FD frame (instead of 8 so far) can be transmitted with bit rates up to 12 Mbit\/s. CAN FD is downward-compatible to the CAN 2.0 A\/B standard, thus CAN FD nodes can be used in existing CAN networks. However, in this case the CAN FD extensions are not applicable.\u003cbr\u003e\u003cbr\u003eThe monitor software PCAN-View and the programming interface PCAN-Basic for the development of applications with CAN connection are included in the scope of supply and support the standard CAN FD.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eISO \/ Non-ISO CAN FD\u003c\/h4\u003e\n\u003chr\u003e\n\u003cp\u003eSince the first implementations of CAN FD, the protocol has been improved and is now included in the standard ISO 11898-1. The revised CAN FD standard is not compatible with the original protocol. \u003cbr\u003e\u003cbr\u003ePEAK-System takes this into account by supporting both protocol versions with their CAN FD interfaces. If required, the user can switch to the CAN FD protocol used in the environment by software („Non-ISO“ and „ISO“). Devices delivered until February 2015 need a firmware update for this functionality. If you are interested and for further information, please contact\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"mailto:info.peak@hms-networks.com\" class=\"EmailLink\"\u003einfo.peak@hms-networks.com.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003ePin assignment D-Sub\u003c\/h4\u003e\n\u003cp\u003e\u003cimg data-alt-override=\"true\" data-title-override=\"true\" alt=\"RTEmagicC D-Sub Male\" title=\"\" height=\"100\" width=\"301\" data-htmlarea-file-table=\"sys_file\" data-htmlarea-file-uid=\"26\" src=\"https:\/\/www.peak-system.com\/fileadmin\/images\/products\/hardware\/D-Sub_Male_RedLine.gif\" class=\"\"\u003e\u003c\/p\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable class=\"Tab_Belegung\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003enot connected \/ optional +5 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eCAN-L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003eCAN-H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e","brand":"PEAK-System Technik","offers":[{"title":"USB-A","offer_id":56937564438906,"sku":"CT-IPEH-004022","price":280.0,"currency_code":"GBP","in_stock":true},{"title":"USB-C","offer_id":56937564471674,"sku":"CT-IPEH-004023","price":280.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/files\/PCAN-USB-FD_USB-A_USB-C_Catalog.jpg?v=1780390724"},{"product_id":"pcan-router-pro-fd","title":"PCAN-Router Pro FD","description":"\u003cp\u003ePCAN-Router Pro FD\u003c\/p\u003e\n\u003cp\u003eProgrammable 6-Channel Router for CAN and CAN FD with I\/O and Data Logger\u003c\/p\u003e\n\u003cp\u003eWith six channels, the PCAN-Router Pro FD links the data traffic of modern CAN FD and classic CAN buses. Pluggable CAN transceiver modules allow flexible adaptation of each CAN channel to the respective requirements. In addition, the router is equipped with an analog input and four digital I\/Os. The CAN messages can be recorded on the internal memory or on an inserted memory card and later read out via the USB connection. With the PCAN-Router Pro FD the data flow of test benches and production plants can be managed, monitored, and controlled. The conversion from CAN to CAN FD or vice versa enables the integration of new CAN FD applications into existing CAN 2.0 networks.\u003c\/p\u003e\n\u003cp\u003eThe behavior of the PCAN-Router Pro FD can be programmed freely for specific applications. The firmware is created using the included development package with GNU compiler for C and C++ and is then transferred to the module via CAN. Various programming examples, such as message forwarding or recording, facilitate the implementation of own solutions.\u003c\/p\u003e\n\u003cp\u003eRequirements: The transfer of the firmware via CAN requires a PEAK CAN interface.\u003c\/p\u003e","brand":"PEAK-System Technik","offers":[{"title":"PCAN Router Pro FD","offer_id":39967144968238,"sku":"CT-IPEH-002220","price":1311.31,"currency_code":"GBP","in_stock":true},{"title":"PCAN Router Pro FD with Ethernet interface","offer_id":39967145001006,"sku":"CT-IPEH-002222","price":1420.12,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/products\/PCAN-RouterProFD.png?v=1665743442"},{"product_id":"pcan-router-fd","title":"PCAN-Router FD","description":"\u003cp\u003ePCAN-Router FD with Phoenix connector\u003c\/p\u003e\n\u003cp\u003eThe PCAN-Router FD allows the connection to two CAN FD or CAN buses. Based on a ARM Cortex M4F microcontroller, the module‘s behavior and the data routing between both CAN FD channels is freely programmable. In particular, the module allows the conversion from CAN to CAN FD or vice versa. This makes it easy to accomplish the integration of CAN FD applications into existing CAN 2.0 networks.\u003c\/p\u003e\n\u003cp\u003eUsing the programming library and the GNU compiler for C and C++, a firmware is created and then transferred to the module via CAN. On delivery, the PCAN-Router FD is provided with a demo firmware. The corresponding source code is included as example in the scope of supply.\u003c\/p\u003e\n\u003cp\u003eThe module is installed in an aluminum profile casing, and is shipped in versions with two D-Sub connectors or a screw-terminal strip.\u003c\/p\u003e\n\u003cp\u003eRequirements: The transfer of the firmware via CAN requires a PEAK CAN interface.\u003c\/p\u003e","brand":"PEAK-System Technik","offers":[{"title":"Phoenix Connectors","offer_id":39967145033774,"sku":"CT-IPEH-002215","price":337.68,"currency_code":"GBP","in_stock":true},{"title":"2 x D-Sub Connectors","offer_id":39967145066542,"sku":"CT-IPEH-002214","price":337.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/products\/PCAN-RouterFD.png?v=1666015846"},{"product_id":"mu-thermocouple1-can-fd","title":"MU-Thermocouple1 CAN-FD","description":"\u003cspan data-mce-fragment=\"1\"\u003eWith the MU-Thermocouple1 CAN FD, measurement data of thermocouples is captured, preprocessed, and transmitted via CAN FD. Depending on the product version, the temperature is measured via 8 connectors, specified for the temperature measuring ranges J, K, or T. Temperatures can be captured in Celsius, Fahrenheit, or Kelvin and processed with an individual scale and offset. The measurement data is then transmitted via CAN FD or classic CAN.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eData processing, message transmission, and LED display are set up with the free Windows software Thermocouple FD Configuration. The configuration created on the computer is transferred via the CAN bus to the MU-Thermocouple1 CAN FD which then runs as an independent CAN node. Multiple devices can be configured independently on a CAN bus.\u003c\/span\u003e","brand":"PEAK-System Technik","offers":[{"title":"J","offer_id":40241946525742,"sku":"CT-IPEH-004005-J","price":710.95,"currency_code":"GBP","in_stock":true},{"title":"K","offer_id":40241946558510,"sku":"CT-IPEH-004005-K","price":710.95,"currency_code":"GBP","in_stock":true},{"title":"T","offer_id":40241946591278,"sku":"CT-IPEH-004005-T","price":710.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/products\/MU-Thermocouple1-CAN-FD.jpg?v=1677586773"},{"product_id":"pcan-micromodfdecu","title":"PCAN-MicroMod FD ECU","description":"\u003cp\u003eThe PCAN-MicroMod FD ECU is a universal control unit for the integration of custom accessories in automotive applications. For this purpose, it provides a CAN FD connection as well as a mix of analogue and digital I\/Os. With its tough casing and two automotive connectors, it is designed for use in utility and heavy duty vehicles under harsh conditions.\u003cbr\u003e\u003cbr\u003ePCAN-MicroMod FD products are configured with a free Windows® software. In addition to simply mapping I\/Os to CAN IDs, function blocks for processing the data are also available. The configuration created on the computer is transferred via the CAN bus to the PCAN-MicroMod FD which then runs as an autonomous CAN node.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eRequirements\u003c\/h4\u003e\n\u003chr\u003e\n\u003cp\u003eThe configuration requires a PEAK CAN interface.\u003c\/p\u003e","brand":"PEAK-System Technik","offers":[{"title":"Default Title","offer_id":55647713231226,"sku":"CT-IPEH-003085","price":677.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/files\/PEAK-System_PCAN-MicroMod-FD-ECU.jpg?v=1752671316"},{"product_id":"cannector-l-can4-fd4-lin2","title":"CANnector L (CAN[4], FD[4], LIN[2], DIO[2])","description":"\u003cdiv class=\"heading-box\"\u003e\n\u003cp\u003e\u003cspan\u003eThe Ixxat CANnector L is a powerful platform for automotive engineering and testing applications, integrating multiple bus systems for efficient logging and gateway operations. It features two LIN, two Digital in\/out and eight CAN channels, four of which are CAN FD capable. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"font-light mb-12\"\u003eFeatures and benefits\u003c\/h2\u003e\n\u003ch6 class=\"mb-3\"\u003eGo-to solution for demanding network requirements\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eEnables easy integration of multiple bus systems into a single, DIN rail mountable device. This is essential for e-mobility projects and complex industrial applications.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eExtensive CAN connectivity\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eThe CANnector L features eight CAN channels, four of which are CAN FD capable, catering extensive connectivity for a wide range of automotive applications.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eMulti-connectivity with various interfaces\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eAdditional interfaces included: 2 x LIN, 1 x Ethernet (10\/100 Base-T), 2 x Digital in\/out (A\/E), 1 x USB 2.0 device and 2 x USB 2.0 host.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eImproved data management for efficient engineering\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eStreamlines data management and protocol handling, optimized for automotive testing, logging and gateway operations. Ensuring easy integration and reliable performance.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eEmbedded platform with own processing power\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eAll applications run on the device, a PC is only needed for configuration or stimulation\/visualization of data, as the actual intelligence is outsourced to the embedded platform.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eOvervoltage protection\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eGalvanic isolation up to 2 kV safeguards against overvoltage and protects from potential electrical damage.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eQuick and easy configuration through ACT support\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eThe CANnector series is supported by the Ixxat ACT (Advanced Configuration Tool), a Windows-based tool to easily configure the device via drag and drop. Most use cases can be solved by using ACT Freeware.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Ixxat","offers":[{"title":"CANnector L (CAN[4] FD[4] LIN[2] DIO[2])","offer_id":55974013895034,"sku":"80018","price":2050.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/files\/1-01-0091-01000-Ixxat-CANnector.avif?v=1759314520"},{"product_id":"cannector-le-can4-fd4-lin2-dio2-etc","title":"CANnector LE (CAN[4], FD[4], LIN[2], DIO[2], ETC)","description":"\u003cdiv class=\"heading-box\"\u003e\n\u003cp\u003e\u003cspan\u003eThe Ixxat CANnector LE is a powerful platform, ideally suited for e-mobility and automotive applications by merging multiple bus systems into a single device. It features two LIN, two Digital in\/out and eight CAN channels, four of which are CAN FD capable, including Industrial Ethernet support. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"font-light mb-12\"\u003eFeatures and benefits\u003c\/h2\u003e\n\u003ch6 class=\"mb-3\"\u003eGo-to solution for demanding network requirements\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eEnables easy integration of multiple bus systems into a single, DIN rail mountable device. This is essential for e-mobility projects and complex industrial applications.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eExtensive CAN connectivity\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eThe CANnector LE features eight CAN channels, four of which are CAN FD capable, catering extensive connectivity for a wide range of automotive applications.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eMulti-connectivity with various interfaces\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eAdditional interfaces included: 2 x LIN, 1 x Ethernet (10\/100 Base-T), 2 x Digital in\/out (A\/E), 1 x USB 2.0 device and 2 x USB 2.0 host.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eImproved data management for efficient engineering\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eStreamlines data management and protocol handling, optimized for automotive testing, logging and gateway operations. Ensuring easy integration and reliable performance.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eEmbedded platform with own processing power\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eAll applications run on the device, a PC is only needed for configuration or stimulation\/visualization of data, as the actual intelligence is outsourced to the embedded platform.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eOvervoltage protection\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eGalvanic isolation up to 2 kV safeguards against overvoltage and protects from potential electrical damage.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eQuick and easy configuration through ACT support\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eThe CANnector series is supported by the Ixxat ACT (Advanced Configuration Tool), a Windows-based tool to easily configure the device via drag and drop. Most use cases can be solved by using ACT Freeware.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eSupport for Linux and QNX\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eUsing the free ECI driver package, the hardware can be easily integrated into Linux-based environments as well as into applications under the QNX real-time operating system. 32- and 64-bit ARM (Raspberry Pi) and Intel X86 platforms are supported.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Ixxat","offers":[{"title":"CANnector LE (CAN[4] FD[4] LIN[2] DIO[2] ETC)","offer_id":55974589923706,"sku":"80021","price":2540.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/files\/1-01-0091-01000-Ixxat-CANnector_6eab0fc4-2fd3-434d-baef-bc1ca2750420.avif?v=1759325725"},{"product_id":"cannector-s-can4-fd2-lin2-dio2","title":"CANnector S (CAN[4], FD[2], LIN[2], DIO[2])","description":"\u003cdiv class=\"heading-box\"\u003e\n\u003cp\u003e\u003cspan\u003eThe Ixxat CANnector S is a powerful platform for automotive engineering and testing applications, integrating multiple bus systems for efficient logging and gateway operations. It features two LIN, two Digital in\/out and six CAN channels, two of which are CAN FD capable. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"font-light mb-12\"\u003eFeatures and benefits\u003c\/h2\u003e\n\u003ch6 class=\"mb-3\"\u003eGo-to solution for demanding network requirements\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eEnables easy integration of multiple bus systems into a single, DIN rail mountable device. This is essential for e-mobility projects and complex industrial applications.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eExtensive CAN connectivity\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eThe CANnector S features six CAN channels, two of which are CAN FD capable, catering extensive connectivity for a wide range of automotive applications.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eMulti-connectivity with various interfaces\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eAdditional interfaces included: 2 x LIN, 1 x Ethernet (10\/100 Base-T), 2 x Digital in\/out (A\/E), 1 x USB 2.0 device and 2 x USB 2.0 host.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eImproved data management for efficient engineering\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eStreamlines data management and protocol handling, optimized for automotive testing, logging and gateway operations. Ensuring easy integration and reliable performance.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eEmbedded platform with own processing power\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eAll applications run on the device, a PC is only needed for configuration or stimulation\/visualization of data, as the actual intelligence is outsourced to the embedded platform.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eOvervoltage protection\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eGalvanic isolation up to 2 kV safeguards against overvoltage and protects from potential electrical damage.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eQuick and easy configuration through ACT support\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eThe CANnector series is supported by the Ixxat ACT (Advanced Configuration Tool), a Windows-based tool to easily configure the device via drag and drop. Most use cases can be solved by using ACT Freeware.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Ixxat","offers":[{"title":"CANnector S (CAN[4], FD[2], LIN[2], DIO[2])","offer_id":55975536853370,"sku":"80017","price":1500.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/files\/1-01-0091-01000-Ixxat-CANnector_dd2a6d2e-7451-4f28-8447-8f147225f78e.avif?v=1759333988"},{"product_id":"cannector-se-can4-fd2-lin2-dio2-etc","title":"CANnector SE (CAN[4], FD[2], LIN[2], DIO[2], ETC)","description":"\u003cdiv class=\"heading-box\"\u003e\n\u003cp\u003e\u003cspan\u003eThe Ixxat CANnector SE is a powerful platform, ideally suited for e-mobility and automotive applications by merging multiple bus systems into a single device. It features two LIN, two Digital in\/out and six CAN channels, two of which are CAN FD capable, including Industrial Ethernet support. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"font-light mb-12\"\u003eFeatures and benefits\u003c\/h2\u003e\n\u003ch6 class=\"mb-3\"\u003eGo-to solution for demanding network requirements\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eEnables easy integration of multiple bus systems into a single, DIN rail mountable device. This is essential for e-mobility projects and complex industrial applications.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eExtensive CAN connectivity\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eThe CANnector SE features six CAN channels, two of which are CAN FD capable, catering extensive connectivity for a wide range of automotive applications.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eMulti-connectivity with various interfaces\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eAdditional interfaces included: 2 x LIN, 1 x Ethernet (10\/100 Base-T), 2 x Digital in\/out (A\/E), 1 x USB 2.0 device and 2 x USB 2.0 host.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eImproved data management for efficient engineering\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eStreamlines data management and protocol handling, optimized for automotive testing, logging and gateway operations. Ensuring easy integration and reliable performance.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eEmbedded platform with own processing power\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eAll applications run on the device, a PC is only needed for configuration or stimulation\/visualization of data, as the actual intelligence is outsourced to the embedded platform.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eOvervoltage protection\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eGalvanic isolation up to 2 kV safeguards against overvoltage and protects from potential electrical damage.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eQuick and easy configuration through ACT support\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eThe CANnector series is supported by the Ixxat ACT (Advanced Configuration Tool), a Windows-based tool to easily configure the device via drag and drop. Most use cases can be solved by using ACT Freeware.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Ixxat","offers":[{"title":"CANnector SE (CAN[4], FD[2], LIN[2], DIO[2], ETC)","offer_id":55976335769978,"sku":"80019","price":2185.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/files\/1-01-0091-01000-Ixxat-CANnector_54862902-c408-4843-bd50-229d67105652.avif?v=1759334811"},{"product_id":"mobilizer-standard-800-8xcan-fd-2-x-lin-1-x-ethernet","title":"Mobilizer Standard 800  CAN[8], LIN[2], DIO[2]","description":"\u003cdiv class=\"heading-box\"\u003e\n\u003cp\u003e\u003cspan\u003eThe Ixxat Mobilizer Standard 800 is a powerful and versatile solution for automotive uses, integrating two LIN and eight CAN FD interfaces. It's ideal for logging, gateway, and rest bus simulation tasks – easily configurable with the Ixxat Advanced Configuration Tool (ACT).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"font-light mb-12\"\u003eFeatures and benefits\u003c\/h2\u003e\n\u003ch6 class=\"mb-3\"\u003eGo-to solution for demanding network requirements\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eThe Mobilizer enables easy integration of multiple bus systems into a single, compact device. This is essential for e-mobility projects and complex industrial applications.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eMulti-connectivity with various interfaces\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eAdditional interfaces included: 8 x CAN\/CAN FD, 2 x LIN, 1 x Ethernet (10\/100\/1000 Base-TX), 2 x Digital in\/out (A\/E), USB 3.0 device and USB 2.0 host and a SDXC slot.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eEmbedded platform with own processing power\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eAll applications run on the device, a PC is only needed for configuration or stimulation\/visualization of data, as the actual intelligence is outsourced to the embedded platform.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eQuick and easy configuration through ACT support\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eThe platform is supported by the Ixxat ACT (Advanced Configuration Tool), a Windows-based tool to easily configure the device via drag and drop. Most use cases can be solved by using ACT Freeware.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eImproved data management for efficient engineering\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eThe Ixxat Mobilizer series streamlines data management and protocol handling, optimized for automotive testing, logging and gateway operations. Ensuring easy integration and reliable performance.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eOvervoltage protection\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eGalvanic isolation safeguards against overvoltage and protects from potential electrical damage.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eSupport for Linux and QNX\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eUsing the free ECI driver package, the hardware can be easily integrated into Linux-based environments as well as into applications under the QNX real-time operating system. 32- and 64-bit ARM (Raspberry Pi) and Intel X86 platforms are supported.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Ixxat","offers":[{"title":"Mobilizer Standard 800 (8xCAN FD, 2 x LIN, 1 x Ethernet)","offer_id":55976556822906,"sku":"80031","price":4300.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/files\/1.01.0143.08000-Ixxat-Mobilizer-Standard.avif?v=1759337297"},{"product_id":"frc-ep190-flexray-plus-4-bundle-fr-can4-fd4-lin2-dio4-rtl-fr-gw-rbs","title":"FRC-EP190 Flexray plus 4 Bundle, (FR,CAN[4],FD[4],LIN[2],DIO[4]), RTL: FR, GW, RBS","description":"\u003cdiv class=\"heading-box\"\u003e\n\u003cp\u003e\u003cspan\u003eThe Ixxat FRC-EP190 FlexRay Plus 4 is a powerful solution for automotive uses. It features eight CAN channels, thereof four CAN FD and two CAN low-speed capable. Additionally, it offers FlexRay, LIN and Digital in\/out functionalities. This makes it an ideal solution for logging, gateway, and residual bus simulation tasks. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"font-light mb-12\"\u003eFeatures and benefits\u003c\/h2\u003e\n\u003ch6 class=\"mb-3\"\u003eGo-to solution for demanding network requirements\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eEnables easy integration of multiple bus systems into a single, compact device. This is essential for e-mobility projects and complex industrial applications.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eMulti-connectivity with various interfaces\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eAdditional interfaces included: 2 x LIN, 1 x Ethernet (10\/100 Base-T), 4 x Digital in\/out (A\/E), USB 2.0 device and host and a SDHC slot.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eImproved data management for efficient engineering\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eStreamlines data management and protocol handling, optimized for automotive testing, logging and gateway operations. Ensuring easy integration and reliable performance.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eEmbedded platform with own processing power\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eAll applications run on the device, a PC is only needed for configuration or stimulation\/visualization of data, as the actual intelligence is outsourced to the embedded platform.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eOvervoltage protection\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eGalvanic isolation safeguards against overvoltage and protects from potential electrical damage.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eQuick and easy configuration through ACT support\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eThe FRC-EP series is supported by the Ixxat ACT (Advanced Configuration Tool), a Windows-based tool to easily configure the device via drag and drop. Most use cases can be solved by using ACT Freeware.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Ixxat","offers":[{"title":"FRC-EP190 Flexray plus 4 Bundle, (FR,CAN[4],FD[4],LIN[2],DIO[4]), RTL: FR, GW, RBS","offer_id":55980656623994,"sku":"80030","price":7300.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/files\/1-13-0094-10407-Ixxat-FRC-EP190-ETC.avif?v=1759410832"},{"product_id":"frc-ep190-max-ethercat-bundle-fr-can4-fd4-lin2-dio4-etc-rtl-fr-gw-rbs","title":"FRC-EP190 Max EtherCAT Bundle, (FR,CAN[4],FD[4],LIN[2],DIO[4], ETC), RTL: FR, GW, RBS","description":"\u003cdiv class=\"heading-box\"\u003e\n\u003cp\u003e\u003cspan\u003eThe Ixxat FRC-EP190 Max EtherCAT is a powerful and versatile solution for automotive uses. It features eight CAN channels, thereof four CAN FD and two CAN low-speed capable. Additionally, it offers EtherCAT, FlexRay, LIN and Digital in\/out functionalities. This makes it an ideal solution for logging, gateway, and residual bus simulation tasks. Configuration is easily done with the Ixxat Advanced Configuration Tool (ACT).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 class=\"font-light mb-12\"\u003eFeatures and benefits\u003c\/h2\u003e\n\u003ch6 class=\"mb-3\"\u003eGo-to solution for demanding network requirements\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eEnables easy integration of multiple bus systems into a single, compact device. This is essential for e-mobility projects and complex industrial applications.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eMulti-connectivity with various interfaces\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eAdditional interfaces included: 2 x LIN, 1 x Ethernet (10\/100 Base-T), 4 x Digital in\/out (A\/E), USB 2.0 device and host and a SDHC slot.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eImproved data management for efficient engineering\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eStreamlines data management and protocol handling, optimized for automotive testing, logging and gateway operations. Ensuring easy integration and reliable performance.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eEmbedded platform with own processing power\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eAll applications run on the device, a PC is only needed for configuration or stimulation\/visualization of data, as the actual intelligence is outsourced to the embedded platform.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eOvervoltage protection\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eGalvanic isolation safeguards against overvoltage and protects from potential electrical damage.\u003c\/p\u003e\n\u003ch6 class=\"mb-3\"\u003eQuick and easy configuration through ACT support\u003c\/h6\u003e\n\u003cp class=\"text-textbody-80 mb-0\"\u003eThe FRC-EP series is supported by the Ixxat ACT (Advanced Configuration Tool), a Windows-based tool to easily configure the device via drag and drop. Most use cases can be solved by using ACT Freeware.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Ixxat","offers":[{"title":"FRC-EP190 Max EtherCAT Bundle, (FR,CAN[4],FD[4],LIN[2],DIO[4], ETC), RTL: FR, GW, RBS","offer_id":55980733006202,"sku":"80028","price":7690.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/files\/1-13-0094-10407-Ixxat-FRC-EP190-ETC.avif?v=1759410832"},{"product_id":"cantrol-industry-fd-kit","title":"CANtrol Industry FD Kit","description":"\u003cp\u003eFor advanced control, testing, and diagnostic applications across industrial, energy, and smart technology systems.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"mso-margin-top-alt: auto; mso-margin-bottom-alt: auto;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Aptos',sans-serif; mso-fareast-font-family: 'Times New Roman'; mso-bidi-font-family: Calibri; mso-bidi-theme-font: minor-latin; mso-fareast-language: EN-GB;\"\u003e\u003cspan data-teams=\"true\"\u003e\u003cstrong\u003eIndividual items total:\u003c\/strong\u003e £921.59 (ex VAT)\u003cbr\u003e\u003cstrong\u003eCANtrol kit saving:\u003c\/strong\u003e £170.73 (≈ 18.4%)\u003c\/span\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\" style=\"mso-margin-top-alt: auto; mso-margin-bottom-alt: auto;\"\u003e\u003cb\u003e\u003cspan style=\"font-family: 'Aptos',sans-serif; mso-fareast-font-family: 'Times New Roman'; mso-bidi-font-family: Calibri; mso-bidi-theme-font: minor-latin; mso-fareast-language: EN-GB;\"\u003eContents:\u003c\/span\u003e\u003c\/b\u003e\u003cspan style=\"font-family: 'Aptos',sans-serif; mso-fareast-font-family: 'Times New Roman'; mso-bidi-font-family: Calibri; mso-bidi-theme-font: minor-latin; mso-fareast-language: EN-GB;\"\u003e\u003cbr\u003e\u003cspan data-teams=\"true\"\u003e• \u003ca href=\"https:\/\/controltech.uk.com\/products\/pcan-explorer-6?_pos=1\u0026amp;_sid=d21e64709\u0026amp;_ss=r\u0026amp;variant=39967144706094\" title=\"PCAN-Explorer 6 (Single or portable variant available)\" rel=\"noopener\" target=\"_blank\"\u003ePCAN-Explorer 6 (Single or portable variant available)\u003c\/a\u003e\u003cbr\u003e• \u003ca href=\"https:\/\/controltech.uk.com\/products\/pcan-usb-fd?_pos=1\u0026amp;_psq=pcan+usb+fd\u0026amp;_ss=e\u0026amp;_v=1.0\" title=\"PCAN-USB FD Interface (Opto-Isolated)\" rel=\"noopener\" target=\"_blank\"\u003ePCAN-USB FD Interface (Opto-Isolated)\u003c\/a\u003e\u003ca title=\"PCAN-USB Adaptor (Opto-Isolated)\" href=\"https:\/\/controltech.uk.com\/products\/pcan-usb-adaptor?_pos=1\u0026amp;_sid=cf5a3a805\u0026amp;_ss=r\" target=\"_blank\"\u003e\u003c\/a\u003e\u003cbr\u003e• \u003ca href=\"https:\/\/controltech.uk.com\/products\/pcan-mini-t-adapter?_pos=1\u0026amp;_sid=fd3a96eb4\u0026amp;_ss=r\" title=\"PCAN-Mini-T Adapter\"\u003ePCAN-Mini-T Adapter\u003c\/a\u003e\u003cbr\u003e• \u003ca href=\"https:\/\/controltech.uk.com\/products\/pcan-term?_pos=3\u0026amp;_sid=2db25d07e\u0026amp;_ss=r\u0026amp;variant=39967141101614\" title=\"PCAN-MiniTerm Termination Adapter\" rel=\"noopener\" target=\"_blank\"\u003ePCAN-MiniTerm Termination Adapter\u003c\/a\u003e\u003cbr\u003e• \u003ca href=\"https:\/\/controltech.uk.com\/products\/pcan-cable-1-2?_pos=1\u0026amp;_sid=e5e9f272a\u0026amp;_ss=r\u0026amp;variant=39967137660974\" title=\"PCAN-Cable 1 (2.0 m, D-Sub 9-pin)\"\u003ePCAN-Cable 1 (2.0 m, D-Sub 9-pin)\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"https:\/\/controltech.uk.com\/products\/control-technologies-branded-carry-bag\" title=\"Control Technologies Branded Carry Bag\"\u003e• Control Technologies branded carry bag\u003c\/a\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Control Technologies UK","offers":[{"title":"Kit with Single License","offer_id":56500707361146,"sku":"15040","price":750.86,"currency_code":"GBP","in_stock":true},{"title":"Kit with Portable License","offer_id":56500707393914,"sku":"15041","price":838.86,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/files\/CANtrol_Industry_FD_Kit.jpg?v=1768992533"},{"product_id":"pcan-usb-xl","title":"PCAN-USB XL","description":"\u003cp\u003eThe CAN interface PCAN-USB XL ensures an uncomplicated connection to CAN XL, CAN FD, and CAN CC buses via the USB port of a computer. Galvanic isolation of up to 500 Volts decouples the PC from the CAN bus. With its compact plastic casing, it is ideal for mobile applications.\u003c\/p\u003e\n\u003cp\u003eThe PCAN-USB XL is delivered ready to use with Windows® and Linux drivers, the PCAN-View monitoring software, and the PCAN-Basic API for developing applications with CAN connection. PCAN-Basic 5 and PCAN-View 6 support the new standard CAN XL.\u003c\/p\u003e\n\u003ch4\u003eCAN XL\u003c\/h4\u003e\n\u003cp\u003eCAN XL (Extended Data-Field Length) was designed to improve the cooperation of CAN and TCP\/IP networks and to enable transmitting larger data streams for use cases such as ECU flashing and software updates. For this, the new standard provides bit rates of up to 20 Mbit\/s and data transmission with up to 2048 bytes per message.\u003c\/p\u003e\n\u003ch4\u003ePin assignment D-Sub\u003c\/h4\u003e\n\u003cp\u003e\u003cimg alt=\"RTEmagicC D-Sub Male\" src=\"https:\/\/www.peak-system.com\/fileadmin\/images\/products\/hardware\/D-Sub_Male_RedLine.gif\"\u003e\u003c\/p\u003e\n\u003ctable class=\"Tab_Belegung\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003eCAN-L\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003eGND\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003eCAN-H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"PEAK-System Technik","offers":[{"title":"Default Title","offer_id":56737388527994,"sku":"CT-IPEH-005022","price":525.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/files\/PCAN-USB-XL_use.jpg?v=1774865378"},{"product_id":"ixxat-canbridge-nt-200","title":"Ixxat CANbridge NT 200","description":"\u003ch3 data-end=\"477\" data-start=\"129\"\u003e\u003cstrong data-end=\"149\" data-start=\"129\"\u003eProduct Overview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-end=\"477\" data-start=\"129\"\u003eThe Ixxat CANbridge NT 200 is a configurable CAN-to-CAN bridge\/router designed to connect different CAN systems. It offers two CAN channels and supports long-distance communication, with advanced message processing and multiplexing functionalities. This makes it ideal for efficient network management and system expansion.\u003c\/p\u003e\n\u003ch3 data-end=\"737\" data-start=\"479\"\u003e\u003cstrong\u003eFeatures and Benefits\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-end=\"737\" data-start=\"479\"\u003e• Seamless system integration\u003cbr data-end=\"539\" data-start=\"536\"\u003eCANbridge NT 200 enables the simple coupling of CAN systems and supports the conversion of networks with different bit rates or frame formats. Ensures compatibility across a wide range of devices.\u003c\/p\u003e\n\u003cp data-end=\"946\" data-start=\"739\"\u003e• Bridge operation for CAN system expansion\u003cbr data-end=\"785\" data-start=\"782\"\u003eBridge mode enables straightforward message exchange between CAN systems, allowing the creation of flexible network topologies such as tree or star structures.\u003c\/p\u003e\n\u003cp data-end=\"1116\" data-start=\"948\"\u003e• Cost savings through simplified wiring\u003cbr data-end=\"991\" data-start=\"988\"\u003eOptimised network layouts reduce wiring complexity, resulting in fewer cables and lower installation and maintenance costs.\u003c\/p\u003e\n\u003cp data-end=\"1282\" data-start=\"1118\"\u003e• On-device intelligence\u003cbr data-end=\"1145\" data-start=\"1142\"\u003eAdvanced filtering, ID translation, data mapping, and multiplexing functions streamline network traffic and improve overall efficiency.\u003c\/p\u003e\n\u003cp data-end=\"1425\" data-start=\"1284\"\u003e• Customisable actions\u003cbr data-end=\"1309\" data-start=\"1306\"\u003eSupports additional programming of action rules using LUA, enabling tailored responses to specific network events.\u003c\/p\u003e\n\u003cp data-end=\"1566\" data-start=\"1427\"\u003e• Device and system protection\u003cbr data-end=\"1460\" data-start=\"1457\"\u003eGalvanic isolation enables network segmentation, protecting devices from damage caused by voltage peaks.\u003c\/p\u003e\n\u003cp data-end=\"1692\" data-start=\"1568\"\u003e• Configurable security levels\u003cbr data-end=\"1601\" data-start=\"1598\"\u003eDefined access levels allow controlled configuration changes and secure firmware updates.\u003c\/p\u003e\n\u003cp data-end=\"1815\" data-start=\"1694\"\u003e• Easy configuration and maintenance\u003cbr data-end=\"1733\" data-start=\"1730\"\u003eA Windows-based configuration tool enables simple setup and maintenance via USB.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"Ixxat","offers":[{"title":"Default Title","offer_id":56783618736506,"sku":"80035","price":367.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/files\/1-01-0331-20000-Ixxat-CANbridge-NT-200_1.png?v=1775822864"},{"product_id":"ixxat-canbridge-nt-420","title":"Ixxat CANbridge NT 420","description":"\u003ch3 data-start=\"129\" data-end=\"477\"\u003e\u003cstrong data-start=\"129\" data-end=\"149\"\u003eProduct Overview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"129\" data-end=\"477\"\u003e\u003cspan\u003eThe Ixxat CANbridge NT 420 is a configurable CAN to CAN bridge\/router to connect different CAN\/CAN FD systems. It offers four CAN channels, of which two CAN FD capable, and supports long-distance communication, with several message processing and multiplexing functionalities. Ideal for efficient network management and system expansion.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-start=\"479\" data-end=\"737\"\u003e\u003cstrong\u003eFeatures and Benefits\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"170\" data-end=\"405\"\u003e• Seamless system integration\u003cbr data-start=\"199\" data-end=\"202\"\u003eCANbridge NT 420 enables the simple coupling of CAN\/CAN FD systems and thus supports the conversion of networks with different bit rates or frame formats. Offers compatibility across different devices.\u003c\/p\u003e\n\u003cp data-start=\"407\" data-end=\"567\"\u003e• Bridge operation enables CAN system expansion\u003cbr data-start=\"454\" data-end=\"457\"\u003eThe bridge mode enables easy message exchange between CAN\/CAN FD systems – to setup tree or star topologies.\u003c\/p\u003e\n\u003cp data-start=\"569\" data-end=\"677\"\u003e• For CAN and CAN FD\u003cbr data-start=\"589\" data-end=\"592\"\u003eFour independent CAN channels, two of which can be switched via software to CAN FD.\u003c\/p\u003e\n\u003cp data-start=\"679\" data-end=\"837\"\u003e• Cost savings due to simple wiring\u003cbr data-start=\"714\" data-end=\"717\"\u003eOptimized topologies enable simpler wiring, resulting in less cables and cost savings at installation and maintenance.\u003c\/p\u003e\n\u003cp data-start=\"839\" data-end=\"997\"\u003e• On device intelligence\u003cbr data-start=\"863\" data-end=\"866\"\u003eAdvanced filter, ID translation, data mapping and multiplexing functionalities streamline network traffic and enhance efficiency.\u003c\/p\u003e\n\u003cp data-start=\"999\" data-end=\"1125\"\u003e• Customizable actions\u003cbr data-start=\"1021\" data-end=\"1024\"\u003eAdditional programming of action rules using LUA for tailored responses to specific network events.\u003c\/p\u003e\n\u003cp data-start=\"1127\" data-end=\"1263\"\u003e• Device and system protection\u003cbr data-start=\"1157\" data-end=\"1160\"\u003eNetwork segmentation with galvanic isolation protects devices against damage caused by voltage peaks.\u003c\/p\u003e\n\u003cp data-start=\"1265\" data-end=\"1359\"\u003e• Configurable security levels\u003cbr data-start=\"1295\" data-end=\"1298\"\u003eDefined access levels for configuration or firmware upload.\u003c\/p\u003e\n\u003cp data-start=\"1361\" data-end=\"1475\"\u003e• Easy configuration and maintenance\u003cbr data-start=\"1397\" data-end=\"1400\"\u003eWindows configuration tool allows for easy setup and maintenance via USB.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e \u003c\/p\u003e","brand":"Ixxat","offers":[{"title":"Default Title","offer_id":56787305890170,"sku":"80034","price":607.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/files\/1-01-0331-42000-Ixxat-CANbridge-NT-420_2.png?v=1776074490"},{"product_id":"ixxat-can-fd-repeater-standard","title":"Ixxat CAN\/FD Repeater Standard","description":"\u003ch3 data-end=\"477\" data-start=\"129\"\u003e\u003cstrong data-end=\"149\" data-start=\"129\"\u003eProduct Overview\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-end=\"477\" data-start=\"129\"\u003e\u003cspan\u003eThe Ixxat CAN\/FD Repeater Standard with two CAN\/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems, and offers galvanic isolation. It provides the flexibility to optimise network structures and liberates them from CAN bus structure constraints for optimised operation.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 data-end=\"737\" data-start=\"479\"\u003e\u003cstrong\u003eFeatures and Benefits\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-start=\"149\" data-end=\"283\"\u003e• Robust industrial use\u003cbr data-start=\"172\" data-end=\"175\"\u003eDesigned for industrial environments, meeting high demands for robustness, temperature ranges, and safety.\u003c\/p\u003e\n\u003cp data-start=\"285\" data-end=\"444\"\u003e• Flexibility in CAN FD network design\u003cbr data-start=\"323\" data-end=\"326\"\u003eHelps to optimise CAN\/CAN FD network structures by enabling extended layouts (stub lines, star and tree topologies).\u003c\/p\u003e\n\u003cp data-start=\"446\" data-end=\"608\"\u003e• Removable push-in connectors\u003cbr data-start=\"476\" data-end=\"479\"\u003eFeatures removable push-in connectors, ensuring hassle-free installation and maintenance without the need for additional tools.\u003c\/p\u003e\n\u003cp data-start=\"610\" data-end=\"822\"\u003e• Fast and transparent operation\u003cbr data-start=\"642\" data-end=\"645\"\u003eMinimal impact on real-time behavior, equivalent to a short line length (ca. 35 m\/175 ns delay). Enabling transparent transmission, compatible with all higher layer protocols.\u003c\/p\u003e\n\u003cp data-start=\"824\" data-end=\"982\"\u003e• Cost savings due to simple wiring\u003cbr data-start=\"859\" data-end=\"862\"\u003eOptimized topologies enable simpler wiring, resulting in less cables and cost savings at installation and maintenance.\u003c\/p\u003e\n\u003cp data-start=\"984\" data-end=\"1226\"\u003e• Enhanced network reliability\u003cbr data-start=\"1014\" data-end=\"1017\"\u003eHigher system reliability by electrically isolating CAN\/CAN FD segments and power up to 5 kV DC for 1 minute. This enhances the protection of the device against damage to electronics caused by voltage peaks.\u003c\/p\u003e\n\u003cp data-start=\"1228\" data-end=\"1401\"\u003e• Network monitoring and fault recovery\u003cbr data-start=\"1267\" data-end=\"1270\"\u003eIn case of disturbances, the repeater automatically disconnects the affected segment and restores it after the fault is resolved.\u003c\/p\u003e\n\u003cp data-start=\"1403\" data-end=\"1625\"\u003e• Integrated bus termination resistors\u003cbr data-start=\"1441\" data-end=\"1444\"\u003eIntegrated bus termination resistors for each CAN channel (120 Ohm, separately switchable by piano switches) prevent reflections on the line ends and ensure optimum communication.\u003c\/p\u003e","brand":"Ixxat","offers":[{"title":"Default Title","offer_id":56787455181178,"sku":"80036","price":260.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0548\/8174\/6990\/files\/1_01_0211_20000_CAN-FD_Repeater_Standard.png?v=1776074998"}],"url":"https:\/\/controltech.uk.com\/collections\/can-fd\/brand-ixxat.oembed","provider":"Control Technologies","version":"1.0","type":"link"}